Rear Entertainment Module (RETM): Installation
- Hang the RETM on the J-hooks.
- Connect the electrical connector.
- Remove the RETM from the J-hooks.
-
NOTE: Tilt the RETM , as necessary, to align it correctly.
Align the left side guide pin with the left side locating hole.
- Lift up the right side of the RETM and engage the U-hooks.
- Install the 4 screws.
- Push on the left and right sides of the RETM to engage the clips.
- Download the configuration information to the RETM configuration. For additional information, refer to PMI in MODULE CONFIGURATION .