October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Headlamp Control Module (HCM)

Headlamp Control Module (HCM)

Removal and Installation

NOTE: The Headlamp Control Module (HCM) is located below the LH headlamp assembly.

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the HCM electrical connector.

3. Remove the 2 bolts and the HCM.
- To install, tighten to 8 Nm (71 lb-in).

4. To install, reverse the removal procedure.