LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> Town Car Protection Series, 4.6 V >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control Belt >> Removal And Installation >> Accelerator Pedal and Bracket >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Accelerator Pedal and Bracket: Installation

  1. Install the accelerator pedal and bracket assembly.
  2. Install the 3 accelerator pedal and bracket retaining nuts. Tighten nuts to 9 Nm (80 lb-in).
  3. Connect the accelerator pedal motor drive cable connector.
  4. Connect the accelerator pedal motor electrical connector.
  5. Connect the accelerator pedal sensor electrical connector.
  6. Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  7. Index the adjustable accelerator pedal and bracket assembly. For additional information, refer to HYDRAULIC BRAKE ACTUATION .
scientia non olet · About LEMON Manuals