LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2005 >> LS 3.9 A >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle/Transmission >> In-Vehicle Repair >> Transmission Support Insulator >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Support the transmission with a transmission jack.
  3. Remove the rear transmission mount outer screws.
    • To install, tighten to 55 Nm (41 lb-ft).
    Fig 1: Locating Rear Transmission Crossmember Mounting Screws
    G03997252Courtesy of FORD MOTOR CO.
  4. Remove the rear transmission mount center screw.
    • To install, tighten to 40 Nm (31 lb-ft).
    Fig 2: Identifying Rear Transmission Mount Center Screw
    G03997315Courtesy of FORD MOTOR CO.
  5. Remove the rear transmission mount.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals