LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2004 >> Town Car Protection Series >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Removal And Installation >> Lumbar Control Switch >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Lumbar Control Switch: Installation

  1. Install the power lumbar switch until seated into bezel.
    Fig 1: Installing Power Lumbar Switch
    G03251331Courtesy of FORD MOTOR CO.
  2. Connect the power lumbar switch electrical connector.
    Fig 2: Connecting Power Lumbar Switch Electrical Connector
    G03251332Courtesy of FORD MOTOR CO.
  3. Position the seat cushion trim cover back and fasten the J-clips.
    Fig 3: Positioning Seat Cushion Trim Cover
    G03251333Courtesy of FORD MOTOR CO.
  4. Install the affected seat. For additional information, refer to FRONT SEAT .
  5. Reactivate the SRS. For additional information, refer to AIR BAG RESTRAINT SYSTEMS .
scientia non olet · About LEMON Manuals