Transmission Selector Cable

WARNING: This page is about a different car, the 2003 Lincoln Aviator. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in PARK, position on a hoist.
Remove the components in the order indicated in the following illustration.
To install, reverse the removal procedure.

Fig 1: Removal Sequence Of Transmission Selector Cable
Courtesy of FORD MOTOR CO.

Item 4: Transmission Selector Lever Cable Grommet Removal Note

Push the cable grommet through the floor pan.

Item 7: Transmission Selector Lever Cable Installation Note

After installing the shift cable, it will be necessary to adjust the shift cable. For additional information, refer to SELECTOR LEVER CABLE ADJUSTMENT .

Item 4: Transmission Selector Lever Cable Grommet Installation Note

The cable grommet must be seated up against the floor pan tightly or water may enter the passenger compartment.