Connecting Rod - Twist

WARNING: This page is about a different car, the 2003 Lincoln Navigator and 2003 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Measure the connecting rod twist on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the measurement is within specification.
- Refer to SYSTEM & COMPONENT TESTING - GASOLINE for the procedure.
- If out of specification, install new components as necessary. Refer to REMOVAL & INSTALLATION - BLACKWOOD, EXPEDITION, F150 PICKUP & NAVIGATOR - GASOLINE for the procedure.
  
  Fig 1: Measuring Connecting Rod - Twist
  Courtesy of FORD MOTOR CO.