General Specifications
CLEARANCE, TOLERANCE & ADJUSTMENT SPECIFICATIONS
| Application |
Inch (mm) |
| Available Drive Pinion Bearing Adjustment Shim In Steps Of .0010" (.0254 mm) |
.010-.038 (.254-.965) |
| Backlash Between Ring Gear & Pinion Teeth |
.008-.013 (.203-.330) |
| Lubricant Deflector To Differential Housing Cover |
.200-.250 (5.08-6.35) |
| Maximum Aluminum Carrier Spread |
.030 (.762) |
| Maximum Backlash Variation Between Teeth |
.004 (.1016) |
| Maximum Differential Case Runout |
.003 (.076) |
| Maximum Radial Runout Of Rear Axle Pinion Flange In Assembly |
.010 (.25) TIR |
| Maximum Runout Of Backface Of Ring Gear |
.003 (.076) |
| Preferred Backlash |
.010 (.254) |
PINION BEARING PRELOAD SPECIFICATIONS
| Application |
INCH Lbs. (N.m) |
| Pinion Bearing Preload (Drive Pinion Collapsible Spacer) Used Bearings |
8-10 (0.9-1.16) |
| Pinion Bearing Preload (Drive Pinion Collapsible Spacer) New Bearings |
16-29 (1.8-3.2) |
LUBRICANTS & SEALANTS
| Lubricant/Sealants |
Specification |
| Pipe Sealant with Teflon(R) D8AZ-19554-A |
WSK-M2G350-A2 |
| Premium Long-Life Grease XG-1-C |
ESA-M1C75-B |
| SAE 5W-30 Super Premium Motor Oil XO-5W30-QSP |
WSS-M2C153-G |
| SAE 75W-140 Synthetic Rear Axle Lubricant F1TZ-19580-B |
WSL-M2C192-A |
| Silicone Rubber D6AZ-19562-AA |
ESB-M4G92-A |
| Stud & Bearing Mount E0AZ-19554-BA |
WSK-M2G349-A1 |
| Threadlock(R) and Sealer E0AZ-19554-AA |
WSK-M2G315-A5 |