Mirror Control Switch
Remove mirror control switch and disconnect harness connector. Ensure that there is continuity between mirror control switch terminals with switch in listed positions. See POWER MIRROR SWITCH TERMINAL IDENTIFICATION table. See Fig 1. If continuity is not as specified, replace mirror control switch.
POWER MIRROR SWITCH TERMINAL IDENTIFICATION
| Switch Position | Check Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 1 & 7; 5 & 6 | |
| Down | 1 & 6; 5 & 7 | |
| Left | 1 & 4; 5 & 6 | |
| Right | 1 & 6; 4 & 5 | |
| Right Mirror | ||
| Up | 1 & 8; 5 & 6 | |
| Down | 1 & 6; 5 & 8 | |
| Left | 1 & 3; 5 & 6 | |
| Right | 1 & 6; 3 & 5 | |