Functional

1. On models equipped with airbags, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Disconnect battery ground cable.
3. Turn lock cylinder key to Run position.
4. Place a 1/8 inch punch in hole in trim shroud under lock cylinder.
5. Depress retaining pin with punch and remove lock cylinder by pulling outward.
6. Install lock cylinder by turning it to Run position and depressing retaining pin.
7. Rotate lock cylinder with key to ensure proper operation.
8. Connect battery ground cable.
9. Rearm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.