LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 1984 >> Mark VII Versace Edition, 5.0 F >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - 6-CYL Diesel >> Adjustments >> Injection Pump Timing >> Diagnostic Tester Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Tester Procedure

  1. Warm engine to operating temperature. Plug tester into diagnostic connector and check timing.
    NOTE: Just off idle, the injection pump timing may retard slightly and then advance. This reaction is normal.
  2. If the timing is incorrect, stop engine. Loosen the mounting bolts of the injection pump and install Injection Pump Rotating Tool (T84P-9000-B) and bracket. See Fig 1 & Fig 2 .
    Fig 1: Injection Pump Bolt and Nut Location
    G1720
    Fig 2: Injection Pump Rotating Tool
    G1721
  3. Start the engine and turn the injection pump. Rotate the pump toward the engine to advance the timing or rotate away from the engine to retard the timing.
  4. After adjustment, retighten the mounting bolts and nuts in the following sequence: nut on inside of front flange near engine, nut on outside of front flange, then rear bolts.
INJECTION PUMP TIMING

Application Engine RPM Degrees BTDC
VE 750 1.5-3.5
VP-20 2000 4.5-7.5