Installation [07/2020 - ]: Procedure
- INSTALL SPARK PLUG
HINT:
Perform "Inspection After Repair" after replacing a spark plug.
Refer to INITIALIZATION [07/2020 - ]
- Install the 8 spark plugs to the cylinder head sub-assembly and cylinder head LH.
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
NOTE:If a spark plug has been struck or dropped, replace it.
HINT:
Install the same parts to their original positions.
- Install the 8 spark plugs to the cylinder head sub-assembly and cylinder head LH.
- INSTALL IGNITION COIL ASSEMBLY
Refer to PROCEDURE - Step 2
- INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 147 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 150 [05/2023 - ]