Removal [09/2015 - 08/2016]: Procedure

(Refer to REMOVAL [09/2015 - ] )

1. Set SST on the retainer.
   • SST: 09808-14030 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   HINT: 

   • Securely attach the claws of SST to the protrusion of the retainer and fix SST in place.
   • Install SST while pressing the claws of SST against the retainer (towards the center of SST).

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Using SST, loosen the retainer.

   • SST: 09808-14030 
   NOTE:

   • Do not use any tools other than those specified in this operation. Damage to the retainer or the fuel tank may result.
   • While pressing down on SST so that the claws of SST do not slip off the protrusion of the retainer, turn the retainer counterclockwise to loosen it.

   HINT: 

   The protrusion of the retainer fit in the ends of SST.

3. Remove the retainer while holding the fuel suction with pump and gauge tube by hand.
4. Remove the gasket from the fuel tank.