Inspection [07/2015 - ]: Procedure

INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY

Check that the throttle valve opens and closes smoothly.
Check that there is no foreign matter accumulated around the throttle with motor body assembly.

Measure the resistance according to the value(s) in the table below.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

Tester Connection	Condition	Specified Condition
1 (M-) - 2 (M+)	20°C (68°F)	0.3 to 100 Ω

TEXT IN ILLUSTRATION

*a	Component without harness connected (Throttle with Motor Body Assembly)

If the result is not as specified, replace the throttle with motor body assembly.