LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> CT 200h Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Ignition Coil And Spark Plug >> Removal [08/2014 - ] >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal [08/2014 - ]: Procedure

  1. REMOVE NO. 2 CYLINDER HEAD COVER 

    Refer to PROCEDURE - Step 20

  2. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 4 ignition coil connectors.
      GTY328873Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and 4 ignition coils.
      NOTE:

      When removing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

  3. REMOVE SPARK PLUG 
    1. Using a 14 mm spark plug wrench, remove the 4 spark plugs.
      GTY331292Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals