LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> CT 200h Base >> Repair and Diagnosis >> Electrical >> Starter >> Power Switch (Starting System) - Service Information >> Power Switch >> Installation [08/2014 - ] >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation [08/2014 - ]: Procedure

  1. INSTALL POWER SWITCH 
    1. Engage the 2 claws to install the power switch.
  2. INSTALL METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 32

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See article. Refer to INITIALIZATION [08/2014 - 08/2015] Refer to INITIALIZATION [08/2015 - ] ).

  4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE 

    Refer to PROCEDURE - Step 69

  5. INSTALL DECK FLOOR BOX RH 

    Refer to PROCEDURE - Step 70

  6. INSTALL REAR NO. 3 FLOOR BOARD 

    Refer to PROCEDURE - Step 71

  7. INSTALL REAR DECK FLOOR BOX 

    Refer to PROCEDURE - Step 72

  8. INSTALL REAR NO. 2 FLOOR BOARD 

    Refer to PROCEDURE - Step 73

scientia non olet · About LEMON Manuals