LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> CT 200h Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Camshaft Position Sensor >> Removal [08/2014 - ] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [08/2014 - ]: Procedure

  1. REMOVE NO. 2 CYLINDER HEAD COVER 

    Refer to PROCEDURE - Step 20

  2. REMOVE NO. 1 CRANK POSITION SENSOR 
    1. Disconnect the No. 1 crank position sensor connector.
      GTY534257Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and No. 1 crank position sensor.
scientia non olet · About LEMON Manuals