LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> GS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Control System - Service Information) >> Manifold Absolute Pressure Sensor >> Installation [10/2015 - ] >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2019 Lexus GS 300, 2018 Lexus GS 300, 2017 Lexus GS 200t, and 2016 Lexus GS 200t. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 2 TURBO PRESSURE SENSOR 
    1. Connect the vacuum hose to the No. 2 turbo pressure sensor.
    2. Install the No. 2 turbo pressure sensor with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    3. Attach the clamp to connect the vacuum hose to the intake manifold.
    4. Connect the No. 2 turbo pressure sensor connector.
  2. INSTALL NO. 1 TURBO PRESSURE SENSOR 
    1. Install the No. 1 turbo pressure sensor with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

    2. Connect the No. 1 turbo pressure sensor connector.
scientia non olet · About LEMON Manuals