DTC B2283: Vehicle Speed Sensor Malfunction: Procedure

1. Delete the DTC. Refer to DTC CHECK / CLEAR [08/2012 - ] .
2. Check for DTC B2282 and DTC B2283.

   OK

   Display (DTC output)	Proceed to
   "DTC B2283" only	A
   "DTC B2283" and "DTC B2282" are output	B

   HINT: 

   If DTC B2282 and DTC B2283 are output, perform troubleshooting for DTC B2282 first. Refer to DTC B2282: Vehicle Speed Signal Malfunction .

B → GO TO DTC CHART 

A: Go to next step 

1. Drive the vehicle and check if the function of the speedometer in the combination meter is normal.

   OK

   Actual vehicle speed and the speed indicated on the speedometer are the same.

   HINT: 

   The vehicle speed sensor is functioning normally when the indication on the speedometer is normal.

NG → GO TO COMBINATION METER SYSTEM 

OK → REPLACE POWER SOURCE CONTROL ECU