LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> RX 350 AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (Service Information) >> Fuel Pressure Regulator >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pressure Regulator: Installation: Installation

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel pressure regulator.
      Fig 1: Remove The 2 O-rings
      GTY274285Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 O-ring
    2. Install the fuel pressure regulator to the fuel filter.
      Fig 2: Identifying Fuel Pressure Regulator
      GTY324888Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Fuel Pressure Regulator
  2. INSTALL NO. 1 FUEL SUCTION SUPPORT  See step  1
  3. INSTALL FUEL PUMP ASSEMBLY WITH FILTER  See step  2
  4. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY  See step  3
  5. INSTALL FUEL SENDER GAUGE ASSEMBLY  See step  1
  6. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE 
    1. Install the fuel suction tube assembly with pump and gauge. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals