LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> LS 460L AWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Intake System (Service Information) >> Intake Air Control Valve Actuator >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Air Control Valve Actuator: Installation: Installation

  1. INSTALL INTAKE AIR CONTROL VALVE ACTUATOR 
    Fig 1: Identifying Intake Air Control Valve Actuator Connector And Bolts
    GTY105361Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Temporarily install the actuator rod to the intake air control valve actuator.
    2. Install the intake air control valve actuator to the intake manifold with the 2 bolts.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    3. Install the actuator rod to the intake air control valve actuator with the nut.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      HINT: 

      When tightening the nut, hold the actuator rod in place so that it does not move.

    4. Connect the intake air control valve actuator connector.
  2. INSTALL V-BANK COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 8
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
  4. INSTALL COWL TOP VENTILATOR LOUVER RH  . Refer to INSTALLATION - Step 11
scientia non olet · About LEMON Manuals