Removal

2UR-GSE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE CAMSHAFT POSITION SENSOR

(a) Disconnect the camshaft position sensor connector.





(b) Remove the bolt and camshaft position sensor.

3. REMOVE VVT SENSOR (for Bank 1)

(a) Separate the 3 wire harness clamps.





(b) Disconnect the VVT sensor connectors.





(c) Remove the 2 bolts and 2 VVT sensors.

4. REMOVE VVT SENSOR (for Bank 2)

(a) Separate the wire harness clamp.





(b) Disconnect the VVT sensor connectors.





(c) Remove the 2 bolts and 2 VVT sensors.