Ignition Coil And Spark Plug: Installation: Installation

WARNING: This page is about a different car, the 2012 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SPARK PLUG
1. Install the 6 spark plugs.
  Torque: 25 N*m (254 kgf*cm, 18 ft.*lbf)
INSTALL IGNITION COIL ASSEMBLY
1. Install the 6 ignition coils with the 6 bolts.
  
  Fig 1: Location of Ignition Coil Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the 6 ignition coil connectors.
3. Connect the 2 wire harness clamps and the noise filter connector.
  
  Fig 2: Identifying Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CAP SUB-ASSEMBLY
INSTALL NO. 2 VENTILATION HOSE
1. Connect the ventilation hose to the cylinder head cover with the clamp.
  
  Fig 3: Locating Ventilation Hose To Cylinder Head Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE ROOM SIDE COVER LH . Refer to INSTALLATION - Step 115
INSTALL ENGINE ROOM SIDE COVER RH . Refer to INSTALLATION - Step 116
INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 117
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 114
CONNECT BATTERY NEGATIVE TERMINAL . Refer to INSTALLATION - Step 92