LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2011 >> LX 570 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Skid Control Buzzer >> Installation (08/2011 - ) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation (08/2011 - ): Installation

  1. INSTALL SKID CONTROL BUZZER ASSEMBLY 
    1. Connect the buzzer connector.
      Fig 1: Identifying Skid Control Buzzer Connector
      GTY109680Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Securely connect the connector.

    2. Attach the clamp to install the buzzer.
      NOTE:
      • Securely insert the clamp into the bracket.
      • If the buzzer is dropped, replace it.
  2. INSTALL NO. 1 SWITCH HOLE BASE  . Refer to INSTALLATION - Step 35
  3. INSTALL INSTRUMENT SIDE PANEL  . Refer to INSTALLATION - Step 36
  4. INSTALL INSTRUMENT PANEL BOX ASSEMBLY  . Refer to INSTALLATION - Step 26
  5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL  . Refer to INSTALLATION - Step 27
  6. INSTALL COWL SIDE TRIM BOARD LH  . Refer to INSTALLATION - Step 28
  7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 29
  8. INSTALL FRONT DOOR SCUFF PLATE LH  . Refer to INSTALLATION - Step 84
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

scientia non olet · About LEMON Manuals