Removal

2GR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE V-BANK COVER Removal

3. REMOVE VVT SENSOR (for Intake Side of Bank 1)

(a) Disconnect the sensor connector.





(b) Remove the bolt and sensor.

4. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)

(a) Disconnect the sensor connector.





(b) Remove the bolt and sensor.

5. REMOVE VVT SENSOR (for Intake Side of Bank 2)

(a) Disconnect the sensor connector.





(b) Remove the bolt and sensor.

6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)

(a) Disconnect the sensor connector.





(b) Remove the bolt and sensor.