July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VSC Buzzer Circuit: Procedure

CHECK CAN COMMUNICATION SYSTEM

Check if a CAN communication system DTC is output. Refer to DIAGNOSIS SYSTEM .

Result

Result	Proceed to
DTC is not output	A
DTC is output	B

B → INSPECT CAN COMMUNICATION SYSTEM

A: Go to next step

INSPECT COMBINATION METER ASSEMBLY
1. Turn the engine switch off.
2. Check the combination meter. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
  OK
  
  The combination meter is normal.
  
  HINT:
  
  If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step. Refer to PROBLEM SYMPTOMS TABLE .
NG → REPLACE COMBINATION METER ASSEMBLY

OK → REPLACE BRAKE ACTUATOR ASSEMBLY