LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> LS 600hL >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control (Service Information) >> Object Recognition Camera >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Object Recognition Camera: Removal: Removal

  1. REMOVE MAP LIGHT ASSEMBLY  . Refer to REMOVAL - Step 28
  2. REMOVE VISOR BRACKET COVER  . Refer to REMOVAL - Step 37
  3. REMOVE VISOR ASSEMBLY LH  . Refer to REMOVAL - Step 38
  4. REMOVE VISOR ASSEMBLY RH  . Refer to REMOVAL - Step 39
  5. REMOVE VISOR HOLDER  . Refer to REMOVAL - Step 40
  6. REMOVE RAIN SENSOR COVER  . Refer to REMOVAL - Step 41
  7. REMOVE REAR INNER VIEW MIRROR ASSEMBLY  . Refer to REMOVAL - Step 42
  8. REMOVE OBJECT RECOGNITION CAMERA 
    Fig 1: Identifying Object Recognition Camera, Harness Connectors, And Fasteners
    GTY268772Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the 3 connectors.
    2. Detach the 3 wire harness clamps.
    3. Remove the 3 bolts.
    4. Detach the clip and remove the object recognition camera.
scientia non olet · About LEMON Manuals