LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> HS 250h >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control (Service Information) >> Knock Sensor >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor: Removal: Removal

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer toREMOVAL .
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
      Fig 1: Identifying Knock Sensor Connector & Nut
      GTY188634Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and knock sensor.
scientia non olet · About LEMON Manuals