LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt (Service Information) >> Child Restraint Seat Tether Anchor >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Child Restraint Seat Tether Anchor: Installation: Installation

  1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    Fig 1: Identifying Child Restraint Seat Tether Anchor Bracket Bolt
    GTY105772Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Align the claw with the positioning hole and install the anchor bracket with the bolt.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade)  . Refer to INSTALLATION - Step 2
  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY  . See step  3
  4. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER 
    Fig 2: Detaching 2 Clips And 2 Claws
    GTY105965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 3: Installing Tether Anchor Cover To Package Tray Trim Panel
    GTY105966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the tether anchor cover to the package tray trim panel as shown in the illustration.
  5. INSTALL ROOF SIDE GARNISH INNER  . Refer to INSTALLATION - Step 16
  6. INSTALL REAR SEAT SIDE GARNISH  . Refer to INSTALLATION - Step 16
  7. INSTALL REAR DOOR SCUFF PLATE  . Refer to INSTALLATION - Step 24
  8. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH  . See step  8
  9. INSTALL REAR SEAT BELT OUTER ANCHOR  . See step  9
  10. INSTALL REAR SEATBACK ASSEMBLY  . Refer to INSTALLATION - Step 1
  11. INSTALL REAR SEAT HEADREST ASSEMBLY RH & LH 
  12. INSTALL REAR SEAT CUSHION ASSEMBLY  . Refer to INSTALLATION - Step 4
scientia non olet · About LEMON Manuals