Installation

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: INSTALLATION

INSTALLATION

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
(a) Using a socket wrench (+),install the 2 screws.
(b) Connect the connectors to the multiplex tilt and telescopic ECU.
NOTICE:
- The wire harness between the telescopic motor and ECU has same shape connectors at both ends.
- When installing them, connect the connectors with the same color.

2. INSTALL INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1 Installation
3. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER Installation
4. INSTALL FRONT DOOR SCUFF PLATE LH
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSPECT SRS WARNING LIGHT
HINT:
Diagnosis System