Inspection Procedure
WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUSE (A/C)
- Remove the A/C fuse from the passenger side junction block.
- Measure the resistance according to the value(s) in the table below
Standard resistance
TESTER CONNECTOR SPECIFIED CONDITION CHARTTester Connection Condition Specified Condition A/C fuse Always Below 1 Ω
NG: REPLACE FUSE
OK: Go to Next Step
- CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - BATTERY)
- Disconnect the L76 air conditioning amplifier connector.
- Measure the voltage according to the value(s) in the table below.
Standard voltage
TESTER CONNECTOR SPECIFIED CONDITION CHARTTester Connection Condition Specified Condition L76-6 (+B1) - Body ground Always 11 to 14 V L76-7 (+B2) - Body ground
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )