September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Pressure Regulator: Installation
- INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (See INSTALLATION
)
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSTALL COWL TOP VENTILATOR LOUVER RH
(See
INSTALLATION
)
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- INSPECT FOR FUEL LEAK (See ON-VEHICLE INSPECTION
)
- INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER
- Install the service hole cover with new butyl tape.
- INSTALL REAR SEAT ASSEMBLY LH (for Power Seat)
- Install the rear seat assembly LH (see
INSTALLATION
).
- INSTALL REAR SEAT ASSEMBLY LH (for Ottoman)
- Install the rear seat assembly LH (see
INSTALLATION
).
- INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
- Install the rear seat cushion assembly (see
INSTALLATION
).