Cruise Control Switch: Testing and Inspection

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSPECTION

INSPECTION

1. INSPECT CRUISE CONTROL MAIN SWITCH
(a) for vehicles without vehicle-to-vehicle distance control mode:
(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:






*1: Lever is in the neutral position
If the result is not as specified, replace the cruise control main switch.
(b) for vehicles with vehicle-to-vehicle distance control mode:
(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:






*1: Lever is in the neutral position
If the result is not as specified, replace the cruise control main switch.