July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Entry Lock And Unlock Switch: Inspection: Inspection

INSPECT ENTRY LOCK AND UNLOCK SWITCH

Remove the outside handle.

Fig 1: Inspecting Entry Lock And Unlock Switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Disconnect the connectors.

Measure the resistance according to the value(s) in the table below.

Standard resistance

Tester Connection (Symbols)	Condition	Specified Condition
o1-1 (TRG-) - o1-3 (TRG+)	Lock switch not pushed	10 kΩ or higher
o1-1 (TRG-) - o1-3 (TRG+)	Lock switch pushed	Below 1 Ω
n1-1 (TRG-) - n1-3 (TRG+)	Lock switch not pushed	10 kΩ or higher
n1-1 (TRG-) - n1-3 (TRG+)	Lock switch pushed	Below 1 Ω