Front No. 1 Speaker: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
1. Install the speaker with the bolt.
  
  Fig 1: Locating Speaker Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (See REASSEMBLY )
REMOVE FRONT DOOR WINDOW UPPER BRACKET GARNISH LH (See REASSEMBLY )
REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH (See REASSEMBLY )
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See REASSEMBLY )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.