LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> RX 400h FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control >> Front Speed Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Speed Sensor: Removal

  1. REMOVE FRONT WHEEL 
  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY 
    1. Remove the bolts, screws, clips and front fender splash shield sub-assembly.
  3. REMOVE FRONT SPEED SENSOR 
    1. Disconnect the front speed sensor connector.
    2. Remove the 2 bolts from the body and the shock absorber assembly.
    3. Remove the clamp from the steering knuckle.
      Fig 1: Locating Front Speed Sensor Connector And Shock Absorber Assembly Bolts
      G05276971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bolt and the front speed sensor.
      NOTE:
      • Prevent foreign matter from attaching to the sensor tip.
      • Clean the installation hole and the surface for the speed sensor every time the speed sensor is removed.
        Fig 2: Locating Front Speed Sensor Bolt
        G05202813Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals