LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> RX 400h AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> SFI System >> DTC P0335 Crankshaft Position Sensor "A" Circuit >> Monitor Description
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Monitor Description

If there is no signal from the crankshaft position sensor despite the engine revolving, the ECM (Included in HV control ECU) interprets this as a malfunction of the sensor.

If the malfunction is not repaired successfully, these DTCs are set 10 seconds after the engine is next started.

scientia non olet · About LEMON Manuals