Steering Pad Switch: Installation

INSTALL STEERING PAD SWITCH LH
1. Engage the 2 claws and the pin.
2. Install the steering pad switch LH with the screw.
3. Connect the connector.
  
  Fig 1: Identifying Steering Pad Switch LH Screw, Claws And Pin
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD SWITCH RH
1. Engage the 2 claws and the pin.
2. Install the steering pad switch RH with the screw.
3. Connect the connector.
INSTALL STEERING PAD (See INSTALLATION )
INSTALL NO.3 STEERING WHEEL COVER LOWER (See INSTALLATION )
INSTALL NO.2 STEERING WHEEL COVER LOWER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )
INSPECT STEERING PAD (See INSTALLATION )
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )