LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> RX 350 FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Engine Coolant Temperature Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Coolant Temperature Sensor: Removal

  1. DRAIN ENGINE COOLANT  (See ON-VEHICLE INSPECTION )
  2. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE NO. 2 AIR CLEANER INLET  (See REMOVAL )
  4. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See  REMOVAL   ) 
  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Remove the engine coolant temperature sensor connector.
    2. Remove the engine coolant temperature sensor.
      Fig 1: Locating Engine Coolant Temperature Sensor Connector
      G04973881Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals