October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Valve Body Assembly: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- REMOVE NO. 2 ENGINE UNDER COVER
(See
REMOVAL )
- REMOVE OIL PAN PROTECTOR ASSEMBLY
(See
REMOVAL )
- DRAIN AUTOMATIC TRANSMISSION FLUID
(See
REMOVAL )
- REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(See
REMOVAL )
- REMOVE VALVE BODY OIL STRAINER ASSEMBLY
(See
REMOVAL )
- DISCONNECT TRANSMISSION WIRE
(See
INSPECTION )
- REMOVE TRANSMISSION VALVE BODY ASSEMBLY
- Remove the bolt, detent spring cover and detent spring.
- Remove the 19 bolts and valve body.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the check ball body and spring.
NOTE:
Do not drop the check ball body and spring.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002