LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System - System Descriptions And Testing, On-Vehicle Inspection, Removal And Installation >> Camshaft Position Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Removal

  1. REMOVE ENGINE ROOM SIDE COVER LH  (See REMOVAL )
  2. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  3. REMOVE UPPER RADIATOR SUPPORT SEAL  (See REMOVAL )
  4. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE AIR CLEANER HOSE ASSEMBLY  (See REMOVAL )
  6. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
    Fig 1: Locating Camshaft Position Sensor Bolt
    G05150034Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE VVT SENSOR 
    1. Disconnect the 4 sensor connectors.
    2. Remove the 4 bolts and 4 sensors.
    Fig 2: Locating VVT Sensor Connector And Bolts
    G05628249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals