LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System Descriptions And Testing, On-Vehicle Inspection, Removal And Installation >> Accelerator Pedal >> On-Vehicle Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

On-Vehicle Inspection

  1. INSPECT ACCELERATOR PEDAL ASSEMBLY 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream main switch on.
    4. Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accelerator Position No. 1 and Accelerator Position No. 2.
    5. Read the value displayed on the Techstream.

    Standard Voltage 

    ACCELERATOR PEDAL OPERATIONS CHART

    Accelerator Pedal Operations Accelerator Position No. 1 Accelerator Position No. 2
    Released 0.5 to 1.1V 1.2 to 2.0 V
    Depressed 2.6 to 4.5 V 3.4 to 5.0 V

    If the result is not as specified, check the accelerator pedal, wire harness and ECM.

scientia non olet · About LEMON Manuals