October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

CHECK DTC
1. Clear DTC (See DTC CHECK/CLEAR ).
2. Turn the engine switch off.
3. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
4. Connect the cable to the negative (-) battery terminal.
5. Turn the engine switch on (IG).
6. Check DTC.
  OK: P060D is not output.
NG: REPLACE ECM (See ECM )

OK: CHECK FOR INTERMITTENT PROBLEMS (See CHECK FOR INTERMITTENT PROBLEMS )