RX 400H

HEATED OXYGEN SENSOR HEATER

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$42	$90	Multiply by 0.001 (A)	Maximum sensor heater current	Minimum test limit	Maximum test limit

THERMOSTAT

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$E1	$E8	Multiply by 01 [°C]	ECT sensor output when estimated ECT reached to malfunction criteria	Malfunction criteria	Maximum test limit

HO2S BANK 1 SENSOR 2

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$02	$07	Multiply by 0.001 (V)	Minimum sensor voltage	Minimum test limit	Maximum test limit
$02	$08	Multiply by 0.001 (V)	Maximum sensor voltage	Minimum test limit	Maximum test limit
$02	$8F	Multiply by 0.001 (V)	Maximum oxygen storage capacity	0	Maximum test limit

HO2S BANK 2 SENSOR 2

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$06	$07	Multiply by 0.001 (V)	Minimum sensor voltage	Minimum test limit	Maximum test limit
$06	$08	Multiply by 0.001 (V)	Maximum sensor voltage	Minimum test limit	Maximum test limit
$06	$8F	Multiply by 0.001 (V)	Maximum oxygen storage capacity	0	Maximum test limit

MISFIRE MONITOR - ALL CYLINDERS

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$A1	$0B	Multiply by 1 [time]	Exponential weighted moving average misfire counts for last 10 driving cycles - total	0	65535
$A1	$0C	Multiply by 1 [time]	Misfire counts for last and current driving cycles - total	0	65535

MISFIRE MONITOR - CYLINDER 1

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$A2	$0B	Multiply by 1 [time]	Exponential weighted moving average misfire counts for last 10 driving cycles - total	0	65535
$A2	$0C	Multiply by 1 [time]	Misfire counts for last and current driving cycles - total	0	65535

MISFIRE MONITOR - CYLINDER 2

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$A3	$0B	Multiply by 1 [time]	Exponential weighted moving average misfire counts for last 10 driving cycles - total	0	65535
$A3	$0C	Multiply by 1 [time]	Misfire counts for last and current driving cycles - total	0	65535

MISFIRE MONITOR - CYLINDER 3

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$A4	$0B	Multiply by 1 [time]	Exponential weighted moving average misfire counts for last 10 driving cycles - total	0	65535
$A4	$0C	Multiply by 1 [time]	Misfire counts for last and current driving cycles - total	0	65535

MISFIRE MONITOR - CYLINDER 4

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$A5	$0B	Multiply by 1 [time]	Exponential weighted moving average misfire counts for last 10 driving cycles - total	0	65535
$A5	$0C	Multiply by 1 [time]	Misfire counts for last and current driving cycles - total	0	6,535

MISFIRE MONITOR - CYLINDER 5

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$A6	$0B	Multiply by 1 [time]	Exponential weighted moving average misfire counts for last 10 driving cycles - total	0	65535
$A6	$0C	Multiply by 1 [time]	Misfire counts for last and current driving cycles - total	0	65535

MISFIRE MONITOR - CYLINDER 6

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$A7	$0B	Multiply by 1 [time]	Exponential weighted moving average misfire counts for last 10 driving cycles - total	0	65535
$A7	$0C	Multiply by 1 [time]	Misfire counts for last and current driving cycles - total	0	65535

TID $01: CATALYST - USING A/F SENSOR AND HO2

TLT	CID	Unit Conversion	Description of Test Value	Description of Test Limit
0	$01	Multiply by 0.0078 (no dimension)	Catalyst deterioration level (bank 1): Determined by waveform of A/F sensor and HO2S	Malfunction criterion
0	$01	Multiply by 0.0078 (no dimension)	Catalyst deterioration level (bank 1): Determined by waveform of A/F sensor and HO2S	Malfunction criterion for catalyst deterioration

Bank 1 Sensor 1

A/F SENSOR BANK 1 SENSOR 1

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$01	$91	Multiply by 0.003 [mA]	Air-fuel ratio sensor current for bank 1 sensor 1	Malfunction criterion for low side rationality	Malfunction criterion for high side rationality

A/F SENSOR BANK 2 SENSOR 1

MID	TID	Scaling	Description of Test Value	Minimum Test Limit	Maximum Test Limit
$05	$91	Multiply by 0.003906 [mA]	A/F current	Minimum Test Limit	Maximum Test Limit

TID $06: A/F SENSOR

TLT	CID	Unit Conversion	Description of Test Value	Description of Test Limit
0	$01	Multiply by 0.000244 (No dimension)	Parameter for identify A/F sensor response rate (bank 1)	Malfunction criterion
0	$11	Multiply by 0.000244 (No dimension)	Parameter for identify A/F sensor response rate (bank 2)	Malfunction threshold for A/F sensor deterioration

EVAP

MID	TID	Scaling	Description
$3D	$CB	Multiply by 0.001 {kPa}	Test value for vacuum pump OFF stuck (P2401)
	$CD	Multiply by 0.001 {kPa}	Test value for vacuum pump ON stuck (P2402)
	$CE	Multiply by 0.001 {kPa}	Test value for vent valve OFF stuck (P2420)
	$CF	Multiply by 0.001 {kPa}	Test value for vent valve ON stuck (P2419)
	$D0	Multiply by 0.001 {kPa}	Test value for reference orifice low-flow (P043E)
	$D1	Multiply by 0.001 {kPa}	Test value for reference orifice high-flow (P043F)
	$D4	Multiply by 0.001 {kPa}	Test value for purge VSV close stuck (P0441)
	$D5	Multiply by 0.001 {kPa}	Test value for purge VSV open stuck (P0441)
	$D7	Multiply by 0.001 {kPa}	Test value for purge flow insufficient (P0441)
	$D8	Multiply by 0.001 {kPa}	Test value for canister small leak (P1420)
	$D9	Multiply by 0.001 {kPa}	Test value for canister gross leak (P1421)
	$DA	Multiply by 0.001 {kPa}	Test value for fuel tank small leak (P1422)
	$DB	Multiply by 0.001 {kPa}	Test value for fuel tank gross leak (P1423)
	$DC	Multiply by 0.001 {kPa}	Test value for fuel vapor-containment valve close stuck (P2451)
	$DD	Multiply by 0.001 {kPa}	Test value for fuel vapor-containment valve open stuck (P2450)