October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Distance Control Ecu: Initialization

NOTE: After removing and installing or replacing the distance control ECU, be sure to perform the following procedures.

INITIALIZE DISTANCE CONTROL ECU
1. Turn the engine switch on (IG).
2. Turn the cruise control main switch on.
3. Depress the brake pedal (brake switch on).
4. With the brake pedal depressed, push the cruise control main switch to +RES 3 times within 3 seconds, and check that the buzzer sounds.
  NOTE: At this time, do not turn the headlight dimmer switch on. Due to the activation of the beam axis automatic adjustment mode, turning the headlight dimmer switch on may result in an incorrect setting. If the headlight dimmer switch is turned on by mistake, perform the beam axis adjustment again.