LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System & Circuit Troubleshooting, Component Inspection And R & I >> Heated Oxygen Sensor >> On-Vehicle Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

On-Vehicle Inspection

  1. INSPECT HEATED OXYGEN SENSOR 
    1. Disconnect the heated oxygen sensor connector.
    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 (HT) and 2 (+B) 20°C (68°F) 11 to 16 Ω
      Fig 1: Identifying Terminals Of Heated Oxygen Sensor Connector
      G04943115Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals