Data List / Active Test
- READ DATA LIST
HINT:
Using the Techstream's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Read the Data List.
Smart Access
DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note IGSW Engine switch on (IG) signal / ON or OFF ON: Engine switch on (ACC, IG) or start
OFF: Engine switch off- ACC SW Engine switch on (ACC) signal / ON or OFF ON: Engine switch on (ACC, IG) or start
OFF: Engine switch off- Immobilizer Immobilizer system status / SET or UNSET SET: Key is not in cabin
UNSET: Key is in cabin- Master Key Master key code signal / MATCH or NO MATCH MATCH: Master key code is sent
NO MATCH: Unmatched master key code is sent- Sub Key Sub-key (Master key) code signal / MATCH or NO MATCH MATCH: Sub-key (master key) code is sent
NO MATCH: Unmatched sub-key (master key) code is sent- Bcc Malfunction Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- Status Transponder chip data / OK or NG OK: Correct data sent
NG: Incorrect data sent- Encrypt Code Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- Serial Number Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- Frame Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- Response Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent-
- PERFORM ACTIVE TEST
HINT:
Perform the Techstream's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.