Service Data
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
Propeller Shaft
DRIVE SHAFT AND PROPELLER SHAFT - SERVICE DATA
| Propeller intermediate shaft assembly runout | Maximum runout 0.3 mm (0.0118 in) |
| Propeller shaft assembly runout | Maximum runout 0.3 mm (0.0118 in) |
Propeller Shaft
DRIVE SHAFT AND PROPELLER SHAFT - SERVICE DATA
| Joint angle | No. 2 joint angle (A) - (B) | -0°19' to - 1 °19' |
| No. 4 joint angle (B) - (C) | 1 ° 07' to 2 ° 07' |
Propeller Shaft
DRIVE SHAFT AND PROPELLER SHAFT - SERVICE DATA
| PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY | dimensions (between the edge surface of the center support bearing and the edge surface of the cushion respectively) | 11.5 to 13.5 mm (0.453 to 0.532 in) |
Propeller Shaft
DRIVE SHAFT AND PROPELLER SHAFT - SERVICE DATA
| Adjustment washer Thickness mm (in) | 2.0 (0.0787) |
| 4.5 (0.1772) | |
| 6.5 (0.2559) | |
| 9.0 (0.3543) | |
| 11.0 (0.4331) |