LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Lighting (Interior)) >> Lighting System >> Operation Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Operation Check

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SEAT LIGHT CONTROL OPERATION 
    NOTE: Perform this inspection with the customize parameter at the initial setting.

    HINT.

    The seat light control illuminates the lights below.

    • Front seat light
    • Rear seat light
    1. The operation and condition of this control are described below.
      OPERATION CHART

      Operation Condition
      Fade in Any door is opened
      Illuminate for approximately 15 seconds, and then fade out When any of the following conditions is met, the front seat light and rear seat light illuminate for approximately 15 seconds, and then fade out
      • The key enters any actuation area around the doors when the engine switch is off and all doors are closed
      • Any door is unlocked when the engine switch is off and all doors are closed
      • The engine switch is turned from on (ACC) to off when all doors are closed
      • All doors are closed when any door is opened and the engine switch is off
      Fade out immediately When either of the following conditions is met, the front seat light and rear seat light fade out
      • The engine switch is turned from off to on (ACC or IG) when all doors are closed
      • All doors are locked when the engine switch is off
  2. INSPECT INTERIOR LIGHT CONTROL OPERATION 
    NOTE: Perform this inspection with the customize parameter at the initial setting.

    HINT.

    The interior light control illuminates the lights below

    • Front interior light
    • Rear interior light
    1. The operation and condition of this control are described below.
      OPERATION CHART

      Operation Condition
      Fade in Any door is opened
      Fade out All doors are closed
  3. INSPECT FOOTWELL LIGHT CONTROL OPERATION 
    NOTE: Perform this inspection with the customize parameter at the initial setting.

    HINT

    The footwell light control illuminates the lights below

    • Footwell light LH
    • Footwell light RH
    1. The operation and condition of this control are described below.
      OPERATION CHART

      Operation Condition
      Fade in When any of the following conditions is met, the footwell light LH and footwell light RH fade in
      • Any door is opened
      • The engine switch is turned from off to on (IG) when the shift lever in P
      Dim The shift lever is adjusted to any position other than P when the engine switch is on (IG) and the shift lever is in P
      Illuminate for approximately 15 seconds, and then fade out When any of the following conditions is met, the footwell light LH and foot light RH illuminate for approximately 15 seconds and then fade out
      • Any door is unlocked when the engine switch is off and all doors are closed
      • The engine switch is turned from on (IG) to off when all doors are closed
      • All doors are closed when any door is opened and the engine switch is off
      Fade out immediately All doors are locked when the engine switch is off and all doors are closed
  4. INSPECT SHIFT LIGHT CONTROL OPERATION 
    NOTE: Perform this inspection with the customize parameter at the initial setting.

    HINT.

    The shift light control illuminates the lights below

    • Shift light
    1. The operation and condition of this control are described below.
      OPERATION CHART

      Operation Condition
      Fade in When any of the following conditions is met, the shift light comes on
      • The engine switch is on (ACC)
      • The engine switch is on (IG)
      Fade out The engine switch is off
  5. INSPECT BATTERY SAVER 
    1. Seat light
      1. With the engine switch off, a key is not in the actuation area, and no vehicle condition changes, check that the lights illuminated by the seat light control remain illuminated for approximately 20 minutes, and then turn off

        HINT

        When the light control operation conditions are met, the battery saver control is canceled.

    2. Interior light
      1. With the engine switch off, a key is not in the actuation area, and no vehicle condition changes, check that the lights illuminated by the interior light control remain illuminated for approximately 20 minutes, and then turn off.

        HINT:

        When the light control operation conditions are met, the battery saver control is canceled

    3. Footwell light
      1. With the engine switch off, a key is not in the actuation area, and no vehicle condition changes, check that the lights illuminated by the footwell light control remain illuminated for approximately 20 minutes, and then turn off

        HINT:

        When the light control operation conditions are met, the battery saver control is canceled.

scientia non olet · About LEMON Manuals