September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Camshaft Position Sensor: Removal
- DRAIN ENGINE COOLANT
(See REPLACEMENT
)
- REMOVE V-BANK COVER SUB-ASSEMBLY
(See
REMOVAL
)
- REMOVE FAN AND GENERATOR V BELT
(See
REMOVAL
)
- REMOVE OIL COOLER PIPE
(See
REMOVAL
)
- REMOVE TIMING BELT COVER SUB-ASSEMBLY NO. 3 LH
(See
REMOVAL
)
- REMOVE CAMSHAFT POSITION SENSOR
- Disconnect the camshaft position sensor connector.
- Remove the bolt, stud bolt and camshaft position sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002